126 EUR
Elevator access control helps you a lot in crowd management.
Elevator access control works with RFID tag. It is designed to give access to specific people to use the elevator and each person must have an elevator tag to be able to use it.By using access control, you won’t have to worry about people entering different elevators. In fact, with this device, you will build a smart elevator that will fully monitor people.
Some time ago, we read that in order to use the elevator crowd control device, it is necessary to use a tag or a Mayfair card.
The elevator tag is actually a type of digital key to give a person access to use the elevator.This type of tag is also called entry and exit tag. But where can you get these tags? Fortunately, Behravid has solved this problem and made the work easier by designing two types of RFID tags and elevator smart tags.
You may have seen in hotels or buses that people open the doors with special cards or pay with some of their digital wallet. These cards are basically RFID cards. If we want to briefly explain these cards, Mayfair card is similar to the key of an apartment.
with the difference that this time there is no key and a card similar to your credit card opens the door to your room. It works like Mayfair tag, but at the same time, they have many differences from each other.
Elevator tags are installed and launched using a software that is only available to the administrator, which we will explain more about in the following. To install one or more tags for your elevator, you need to get a smart tag first. (In order to prepare these types of tags, enter the products section)
When you lose your elevator original tag or forget its original password, you need to order a replacement copy tag for it.
In this situation, by using the elevator tag copier, you can have a replacement tag for your elevator. The price of copy tag is different from normal tags because these tags are not read only and normal tags can be copied or written on them.
Hacking Mayfair tags or RFID cards has become a very simple task in today’s era.
Hackers can easily remove or replace the relevant information on your tag using the scanners they have made! But Behroid’s elevator tag is not easily penetrated because it uses an uncopyable elevator tag. These tags are like an uncopyable key and very secure against hacking.
There are two types of elevator tags: normal tag, non-copyable smart tag
To know the price of each of these tags, click on it.
You will easily control the elevator with an application. This device also contains a Persian application that can be installed on the phone. With this software, you can issue cards, block or unblock desired units.
Define a guest code so that a person who does not have a tag or smart card can use the elevator or extract a traffic control report! The basis of this application is explained in the site menu in the downloads section as a PDF file.
As said, you can completely cut off any access of any unit you want.
By blocking that unit, full access will be taken away from him and the person in question will no longer be able to use his smart tag. All you have to do is remove access from the unit by pressing the block button in the application provided by the seller (or downloaded from the site).
After purchasing this device, you will have a one-year guarantee that the device works properly, and even after starting and installing this device on your elevator, you will receive up to ten years of after-sales service from us!
All the rights of the products and content of this site belong to Behroid and any copying of the content and products of the site is unauthorized and without our consent
Designed and Developed by WEBIXA
محصولات ساخت بهروید، شامل 1 سال گارانتی و 10 سال خدمات پس از فروش میباشد ! Dismiss
Reviews
There are no reviews yet.